Lab notes #4: every way to grow
High-pressure mist, deep water, drip, flood tables, wicks, plain old soil. How Jardin is designed to run all of them, what it watches in each, and how fast things go wrong when a pump dies.
Ask ten growers the best way to grow and you'll get eleven answers and one argument in the parking lot. We're not picking a side. Jardin is designed so the same system runs whatever you already grow in, with one setting that switches on the right routines and the right safety rules.
Quick honesty check before the fun part: WaterWorks has root hardware drawn for each of these, the firmware already knows the hpa, dwc and drip modes (lab notes #3 has the tour), and the prototypes run the core control jobs: dimming, fan control, smart-plug switching and mixing. Everything else on this page is designed and on the roadmap.
Same Jardin app under every one of these. Pick the mode, plug in the matching sensors, and Jardin switches on the checks that style needs.
The cheat sheet
The last column is the one that keeps us up at night: roughly how long roots have if the main pump dies at lights-on in a warm room. These are rough field estimates, and we'll check every one of them during early access.
| Method | How it works | What Jardin watches | If the pump dies |
|---|---|---|---|
| High-pressure aeroponics (HPA) | Roots hang in a dark chamber and get a fine mist at around 80–100 psi every minute or two | Pressure on every burst, chamber humidity, flow, battery | Tens of minutes to hours |
| Low-pressure aeroponics (LPA) | Sprayers drizzle roots with bigger droplets from an ordinary pump | Chamber humidity, pump current | 1–4 hours |
| Fog | Ultrasonic foggers fill the root chamber with very fine fog | Fogger tank level, chamber humidity | Hours. Supplement only |
| Deep water culture (DWC, RDWC) | Roots sit in oxygenated nutrient solution | Air pump power, water temperature, levels | 2–12 hours (air) |
| Nutrient film technique (NFT) | A thin stream of solution flows down sloped channels past the roots | Return flow, pump current, a float at the channel inlet | 1–3 hours |
| Flood and drain | A table floods on a schedule, then drains back to the reservoir | Table float, reservoir weight, fill flow | Days |
| Drip, recirculating | Drippers feed pots, runoff returns to the reservoir | Litres per shot, runoff tray, reservoir weight | 12–36 hours |
| Drip, drain-to-waste | Fresh feed every shot, runoff goes away, sensors steer the plant | Substrate moisture and EC, runoff, waste tank | 12–36 hours |
| Soak and bottom-watering | A tray floods a few centimetres deep, pots drink from below | Tray level, reservoir weight | Days |
| Wick and Kratky | Wicks or a still reservoir, no pump at all | Water level or weight, pH, EC, temperature | Not applicable: monitor only |
| Soil | Watering by moisture, with a gentle feed or plain water | Soil moisture and temperature | Days |
Every method also gets the boring essentials: leak pads, a hardware cut-off on the pump power, the reservoir on a scale, proof of life from every pump, the climate loop, the camera and automatic journal entries.
The fast ones
HPA is the high-wire act. Fine mist means loads of oxygen and fast roots, and also no margin. That's why it gets the most hardware: a pressure tank, a sensor plus a mechanical pressure switch and a relief valve, a filter, one valve per zone, a battery to keep misting through a power cut, and a lifeboat: a shallow pool and a backup pump that keep the roots wet if everything else fails.
LPA is HPA's laid-back cousin. Bigger droplets, cheaper parts, and the puddle on the chamber floor buys you hours instead of minutes. A daily plain-water flush keeps the sprayers from clogging.
Fog is lovely to look at and we support it, but as a humidity top-up next to aeroponics or NFT, or in a cloning dome. Fog carries very little nutrient, and roots grown on fog alone tend to be all hair and no muscle. If you set fog as your only method, the app will gently say so. Every time.
NFT runs a film of solution down channels all day. Jardin counts the return flow every minute. If the flow stops while the pump is still drawing current, something is blocked or split. If the pump draws nothing, it died, and a backup pump on the same line takes over if you fitted one.
The comfortable middle
DWC and RDWC are the friendliest start in hydro. The air pump sits on a monitored smart plug, so its power draw is the proof that bubbles are happening. Water temperature and air pump power together give an estimate of dissolved oxygen. In recirculating setups, a float in each bucket spots a split line: one bucket drops while the control bucket doesn't.
Flood and drain learns your table on the first flood: how long it takes to fill, and how much the reservoir loses doing it. After that, the pump can never run longer than one and a half times that learned fill time, and if the water doesn't come back within 20 minutes, Jardin stops flooding and tells you your roots are sitting in water.
Drip, two ways
Recirculating drip checks every shot against the flow meter. A shot that comes in low means a clogged dripper, and Jardin can stretch the shot a little and warn you. A shot that comes in high, with the reservoir getting lighter and nothing returning, means a split line, and that zone gets closed.
Drain-to-waste with crop steering is where it gets nerdy. Moisture sensors in a representative pot drive three phases a day: ramp up until runoff, hold, then dry down before lights-off. How much the pot dries overnight is one of the main levers growers use to push a plant toward leafy growth or toward flowering. Jardin learns your pot's capacity in the first two days, and if a sensor starts reporting nonsense, it falls back to a plain schedule instead of guessing.
The gentle ones
Soak, bottom-watering and wicks are the easiest on hardware and a great match for soil. Fill to a level, let the pots drink, drain. For wick setups, Jardin suggests a dry day every week or so to let the roots breathe.
Kratky has no pump at all, so Jardin just watches: pH, EC, temperature and water level, with nudges like "EC rising fast, add water." Dosing is switched off and the dosing channels are unmapped, so there's literally nothing to misbehave. It's the cheapest way into the data side, and a good stepping stone to DWC.
Soil gets its own rules. With bottled feeds, the dosing caps halve and watering follows soil moisture with long dry-downs. With living soil, dosing is switched off completely: no salts near your microbes. Jardin handles moisture, climate and photos, and the dashboard replaces EC targets with soil moisture and temperature.
Media, briefly
| Medium | What it's like | pH it likes |
|---|---|---|
| Coco | Behaves like hydro, dries fast, wants daily feeding and a little runoff | 5.8–6.2 |
| Rockwool | Holds a lot of water, no buffering, EC drifts with every shot | 5.5–6.0 |
| Soil, bottled feed | Buffered, alive, easy to over-water | 6.3–6.8 |
| Living soil | No-till, microbial, water only | 6.3–7.0, not controlled |
All these ranges are starting points we'll confirm with growers and an agronomist before they become defaults.
Why bother supporting everything?
Because you already own a setup, and you shouldn't have to throw it out to get a smarter grow. And because every method, logged honestly, teaches the next grower something. That's the whole Bay in one sentence.
Next week, in lab notes #5: dosing by the element, or how to ask for exactly 50 ppm of magnesium and get it.